A few days ago, Huawei announced that it will release the new Huawei Huawei Mate 30 series flagship on September 19th in Munich, Germany. It is also expected to see the appearance of the Watch GT 2 smart watch. However, before the official official release, OnLeaks and Pricebaba, which had a high hit rate for unlisted new machines, released a series of high-definition renderings of Mate 30 Pro. After the sharing of the big gods, this new machine rendering Appearance credibility is also improved.
 |
| Huawei Mate 30 Pro released |
Huawei Mate 30 Pro is released from the latest release of the news, will be officially released on 9/19
Looking at the Mate 30 Pro look-and-feel renderings, Pricebaba also said that Onleaks pointed out that some of the details in the rendering may not be 100% accurate due to factors such as CAD production. But in fact, the appearance of this rendering is similar to the recent rumors, basically the big direction should not be much different from the official version:
As you can see, the Huawei Mate 30 Pro uses the same glass as the Mate 20 Pro. However, this time the design adjustment is also quite obvious. The first is the four-lens main camera with a circular arrangement on the back of the machine. The outer ring also echoes the official notice of the day (see the end of the article for an extended reading). On the left side of the camera, it comes with dual LED flash, sensor and Leica brand lettering. In terms of phone size, according to Pricebaba, the Mate 30 Pro measures approximately 158 x 73.6 x 8.7mm, and the thickness of the main camera is also calculated to be 9.7mm:
When you see the front of the phone, you can see that the screen of the Mate 30 Pro is quite narrow at the upper and lower ends of the screen, and the curvature of the curved edges on both sides of the screen is close to the so-called "waterfall full screen" design. OnLeaks pointed out that considering the curved screen is difficult to measure the actual screen size, it is estimated to be around 6.6 。.
In addition, the Mate 30 Pro screen still uses a "bang" design with a gap. Although the bangs full screen model has rarely been seen this year, the reason why the Mate 30 Pro uses the bang design should be acceptable to most people, because there are a total of three self-timer lenses and various sensors in the screen gap:
Another point worth paying attention to is the physical power button that is visible to the entity this time, but this batch of renderings shows me the volume button. Some time ago there was a leak message suggesting that the Mate 30 Pro will set the touch area above the power button, allowing the user to adjust the volume by sliding up and down. In addition, the Mate 30 Pro also has no 3.5mm headphone jacks:
In terms of hardware specifications, it is reported that the Mate 30 Pro will be equipped with a Kirin 990 processor and a 40-megapixel four-lens main camera. The standard lens and super wide-angle lens are 40 million pixels, and will be equipped with an 8 million pixel telephoto lens. 3D ToF lens. As for the camera before the three lenses, there is no specification message.
In terms of power, Pricebaba mentioned that the Mate 30 Pro will be equipped with a 4500mAh battery, supporting 25W wireless fast charging and up to 55W wired fast charging
No comments:
Post a Comment